Modun điều khiển màn hình IBA - Iba VietNam

ibaNet Protocol

The data collected from the buses are converted and

transmitted over the ibaNet fiber optic interface.

The data for ibaPDA is available via an input card in

the computer of the card family ibaFOB-D, e.g.

ibaFOB-2io-D or ibaFOB-4i-D.

The iba bus monitors support various ibaNet protocols. The following table shows which device supports what ibaNet protocol.

Name	32Mbit Flex	32Mbit	3Mbit
ibaBM-CAN- Iba VietNam	-	♦	-
ibaBM-DP- Iba VietNam	♦	♦	♦
ibaBM-PN- Iba VietNam	♦	-	-
ibaBM-eCAT- Iba VietNam	♦	-	-
ibaBM-DDCS- Iba VietNam	♦	-	-

1. IbaBM-CAN Iba VietNam

• Diagnostics

An outstanding feature of the bus monitor is the ability to measure the cycle time. This is accomplished by gauging the time distance between the transmitted messages of each ID (in μs). These distance values can be graphically displayed in ibaPDA and used for trigger control or other processing. This diagnostic feature enables the user to discover malfunctions caused by bus overload or insufficient priority of important IDs.

Short description

Name: ibaBM-CAN Iba VietNam

Description: Bus monitor for CAN/CANopen

Order number: 13.122000

2. IbaBM-DP Iba VietNam

• Diagnostics

There are numerous diagnostic functions available in ibaPDA for assessing the operating status of the device and PROFIBUS communication. In the I/O manager of ibaPDA, the operating states of the masters and slaves are highlighted in color. Further diagnostic displays provide information about the bus (baud rate, cycle time and number of slaves) as well as about the individual slaves (status, telegram counter, hex views of input, output, configuration, and parameter telegrams). Diagnostic information can be, as well as other signals, captured via slave or bus diagnostic modules. This allows a non-stop recording. ibaBM-DP measures the bus voltage of the slaves with integrated A/D converters. These values are displayed as a bar chart in the I/O manager. The voltages recorded by the diagnostic modules secure a long-term surveillance of the PROFIBUS system. All status changes at the PROFIBUS that are recognized, are recorded in an event log report fitted with a time stamp. Additionally, a filter function facilitates the search for certain events. These entries can thus be exported as a TSV-file, been copied and inserted into an Excel table for further processing.

Short description

Name:  ibaBM-DP Iba VietNam

Description: Bus monitor for PROFIBUS

Order number 13.121001

3. IbaBM-eCAT Iba VietNam

• Fields of Applications

In general, recording of data transmitted on an EtherCAT bus 

Drive control; for monitoring of reference and actual values, process and status bits on drive systems interconnected over EtherCAT 

EtherCAT-based automation for test benches, automotive diagnostic

Short description

Name: ibaBM-eCAT Iba VietNam

Description: Bus monitor for EtherCAT

Order number: 13.127000

4. IbaBM-PN Iba VietNam

The both internal PN devices of the bus monitor can be configured independently in ibaPDA. Each of the internal PN devices can capture up to 1440 Bytes (incl. status bytes) per cycle. The devices can also be used to send data via PROFINET from ibaPDA to a controller. Certain signal values can be monitored for example, and, if a limit value is exceeded, a warning message can be issued or other events indicated. A data volume of up to 1440 Bytes per device is possible.

Short description

Name: ibaBM-PN Iba VietNam

Description: Bus monitor for PROFINET

Order number: 13.120000

5. ibaBM-DDCS Iba VietNam

• Automatic Detection

IbaBM-DDCS detects the connected drives with the corresponding signals automatically. The device enables free and interference free access to the drive’s parameter and to the communication telegrams between drive and controller. ibaBM-DDCS supports the ibaNet protocol 32Mbit Flex. The sampling rate can be up to 40 kHz, whereby up to 4060 Byte can be transmitted over the fiber optics to the ibaPDA computer. One ibaBM-DDCS device can simultaneously monitor all drives which are connected to a common bus line. In theory this can be over 100 drives per device

Short description

Name: ibaBM-DDCS Iba VietNam

Description: Bus monitor for DDCS drive bus

Order number: 13.120710