EtherCAT P Coupler series EK13 - Beckhoff Viet Nam

Xuất Xứ:

GERMANY

Tình Trạng:

Mới :100%

Hãng sản xuất:

Beckhoff

Giá bán:

Liên hệ 0947 778 104

Mã sản phẩm:

EtherCAT P Coupler series EK13 - Beckhoff

The extreme fast I/O technology

In analogy to the Beckhoff Bus Terminals, the EtherCAT Terminal system is a modular I/O system consisting of electronic terminal blocks. In contrast to Bus Terminals, where the fieldbus signal is implemented within the Bus Coupler on the internal, fieldbus-independent terminal bus, the EtherCAT protocol remains fully intact down to the individual terminal.

Thông tin sản phẩm
Thông số kỹ thuật

SERIES EK13 | EtherCAT P coupler

The series EK13 coupler integrates EtherCAT Terminals (ELxxxx) in the EtherCAT P network. The upper EtherCAT P interface is used to connect the coupler to the network, the lower EtherCAT-P-coded M8 socket is used for optional continuation of the EtherCAT P topology. Since EtherCAT P integrates the power supply and the communication on a single line, an additional power supply for the coupler via the terminal points is no longer required. Depending on the application, the system and sensor supply US or the peripheral voltage for actuators UP can be bridged to the power contacts. In addition to the Run LED and the link and activity status, status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.

EtherCAT P Coupler	EK1300 E-bus interface (EtherCAT Terminals EL/ESxxxx)


Extension system and junctions	EK1310 1-port EtherCAT P extension with feed-in

	EK1322 2-port EtherCAT P junction with feed-in

Technical data	EK13
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT P networks
Data transfer medium	EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks
Bus interface	2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Power supply	from EtherCAT P (24 V DC for US and UP)
Total current	from EtherCAT P, max. 3 A per US and UP
Current consumption from US	40 mA + (∑ E-bus current/4)
Current consumption from UP	typ. 4 mA
Current supply E-bus	2000 mA
Current rating per port	max. 3 A per US and UP
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE