Công tắc giật dây loại PAS - Kiepe Viet Nam

Download:  2017_511_PAS_EN_KB.pdf

TECHNICAL DATA

Designation Pull rope emergency stop switch type PAS

emergency stop device with latching function

Type of actuation Pull and wire-break detection; snap action, single-side rope installation

Complies with DIN EN ISO 13850; DIN EN 60947-5-5; DIN EN 60947-5-1;

Suited for Control unsits and systems in accordance with DIN EN 60204

Mechanics

Enclosure PBT yellow; RAL 1004

Reset button IXEF; blue, similar to RAL 5010

Mounting 4 x M6

Pull rope length Up to 30m

Weight 0.4kg

Electrical System

Switching system 1 SPDT, 1 N.C.; cam operated, positive-making snap-action switches

Cable entry 3 x M20x1.5 threaded holes with 3x dummy screw; 1x cable gland;

Sealing area Ø 6mm ... Ø 12mm

Utilization category: Ue/Ie AC-15: 230V / 1,5A

DC-13: 60V / 0,5A

DC-13: 24V / 2,0A

Connection cross section 1mm2 ... 2.5mm2

Rated insulation voltage Ui AC 250V

Rated impulse withstand voltage Uimp 2.5kV, degree of pollution III

Conventional thermal current Ith 6A

Contact reliability 10 million switching operations (mechanically)

*Note: Keep the spacer tool for future adjustments.

511_06 PAS.indd 2 07.07.17 11:38

Ambient conditions in accordance with DIN EN 60947-5-5

Ambient temperature Protection -25°C.. + 70°C

Rating IP 65 (EN 60529)

Safety data in accordance with DIN EN ISO 13849 and EN 61062:

Safety functions Emergency stop incl. latching

Manual reset, Wire-break-detection

Usable in risk zone Up to PLe (depending on customer application (DIN EN ISO 13849))

B10d-value 10.000 actuations