Công tắc giật dây loại HEN 211 - Kiepe Việt Nam

Download:  2017_472_HEN_211_EN_KB.pdf

TECHNICAL DATA

Designation Pull-rope emergency stop switch type HEN 211 – emergency stop device with latching

function and standard-bus-modul

Type of actuation Bidirectional; spring-loaded ("snap action")

Complies with DIN EN ISO 13850; DIN EN 60204-1; DIN EN 60947-5-5;

DIN EN 60947-5-1; EN 620; BGI 710

Suited for Control units and systems in accordance with DIN EN 60204

Mechanics

Enclosure Aluminum GK-AISi 12

Finish DD-paint

Enclosure – yellow (RAL 1004), release lever – red (RAL 3000), reset lever – blue (RAL 5010)

Mounting 2 slotted holes for M8 screws

Installation position Horizontal, tilt angle up to about 15°

Pull-rope length Up to approx. 100m

Actuation force 30N ± 10N

Weight 1.7kg

Electrical system

Switching system 2 normally close contacts (NC) + 1 normally open contact (NO) for bus-modul;

cam operated positive-making switches

Cable entry Threaded holes 2x M25 x 1.5 with each

1x screwed cable gland: sealing area Ø11 mm to Ø16 mm; 1x dummy screw

Utilization category AC-15: 230V; 6A

DC-13: 110V; 1.1A

Connection cross section 1mm2 to 2.5 mm2

Protective conductor connection In the casing; M4

Rated insulation voltage Ui 400V

Rated impulse withstand voltage Uimp 2.5kV, degree of pollution III

Conventional thermal current Ith 16A

Contact reliability 220.000 switching operations

Ambient conditions in accordance with DIN EN 60947-5-5

Permissible ambient temperature –25°C…+70°C

Protection rating IP 67 in accordance with EN 60529

Safety data in accordance with DIN EN ISO 13849 and EN 61062

Safety functions Emergency stop incl. latching

Manual reset

Usable in accordance with

DIN EN ISO 13849-1

Up to PLe (depending on customer application)

B10d value 24,000 actuations