Hệ thống đánh lửa IntelliSpark - FW Murphy Vietnam

Power Requirements:

• IS-16/8: 10-30 VDC (12/24 VDC nominal) 3.0 Amps max
• IS-32: 10-30 VDC, 6.0 Amps max

Note: The input current is dependent on firing rate

Environment:

• Temperature Operating Range: -4° to +158° F (–20° to +70° C)
• Enclosure Rating: IP66 with display mounted in the enclosure box; Type 4 without display mounted in the enclosure box

Third Party Approvals:

• CSA Certified for Class I, Div 2, Groups B, C, D
• IS-8: Fires 8 outputs
• IS-16: Fires 16 outputs
• IS-32: Fires 32 outputs, 2 outputs can fire simultaneously

Energy Storage:

• IS-32/16/8: 180 mJ max, per tank capacitor

Communications:

• IS-32/16/8: An auxiliary comm port is available, RS-485 interface, MODBUS protocol

Note: This port has a user programmable slave ID, runs at 9600 baud or 19.2K. All parameters available can be modified in parallel using the main front panel display.

Output Electrical Specifications:

• IS-8: Single tank capacitor
• IS-16: Dual, alternately fired tank capacitors
• IS-32: Quad, alternately fired pairs of tank capacitors
  Ignition Outputs are High-side firing referenced to the T pin on the output harness

Note: These outputs are not ground referenced unless the T lead is grounded. Recommend careful adherence to installation instructions.

• Maximum Output Current Pulse Rating: 40 Amps

Note: Current pulse amplitude is dependent on the coils in use and the tank capacitor voltage.

• IT-230 Series coils: 7 Amp pulse @ 230Volts
• IT-150 Series coils: 35 Amps @ 150 Volts
• IT-250 series coils: 20 Amps @ 250 Volts

4/20 mA Inputs:

• 4/20mA A: This input retards timing (if programmed) when schedule A is active.
• 4/20mA B: This input retards the timing (if programmed) when schedule B is active.