Biến tần ATV630U15M3 - Schneider Việt Nam

Main

range of product

Altivar Process ATV600

product or component type

Variable speed drive

product specific application

Process and utilities

device short name

ATV630

variant

Standard version

product destination

Asynchronous motors
Synchronous motors

mounting mode

Wall mount

EMC filter

Without EMC filter

IP degree of protection

IP21 conforming to IEC 61800-5-1
IP21 conforming to IEC 60529

degree of protection

UL type 1 conforming to UL 508C

type of cooling

Forced convection

supply frequency

50...60 Hz - 5...5 %

network number of phases

3 phases

[Us] rated supply voltage

200...240 V - 15...10 %

motor power kW

1.5 kW (normal duty)
0.75 kW (heavy duty)

motor power hp

2 hp normal duty
1 hp heavy duty

line current

5.9 A at 200 V (normal duty)
5 A at 240 V (normal duty)
3.3 A at 200 V (heavy duty)
3 A at 240 V (heavy duty)

prospective line Isc

50 kA

apparent power

2.1 kVA at 240 V (normal duty)
1.2 kVA at 240 V (heavy duty)

continuous output current

8 A at 4 kHz for normal duty
4.6 A at 4 kHz for heavy duty

maximum transient current

8.8 A during 60 s (normal duty)
6.9 A during 60 s (heavy duty)

asynchronous motor control profile

Constant torque standard
Variable torque standard
Optimized torque mode

synchronous motor control profile

Permanent magnet motor
Synchronous reluctance motor

output frequency

0.0001…0.5 kHz

speed drive output frequency

0.1…599 Hz

nominal switching frequency

4 kHz

switching frequency

2...12 kHz adjustable
4...12 kHz with derating factor

safety function

STO (safe torque off) SIL 3

discrete input logic

16 preset speeds

communication port protocol

Modbus serial
Ethernet
Modbus TCP

option card

Slot A: communication module, Profibus DP V1
Slot A: communication module, Profinet
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink

Complementary

output voltage

<= power supply voltage

permissible temporary current boost

1.1 x In during 60 s (normal duty)
1.5 x In during 60 s (heavy duty)

motor slip compensation

Automatic whatever the load
Can be suppressed
Adjustable
Not available in permanent magnet motor law

acceleration and deceleration ramps

Linear adjustable separately from 0.01...9999 s

braking to standstill

By DC injection

protection type

Thermal protection: motor
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive

frequency resolution

Display unit: 0.1 Hz
Analog input: 0.012/50 Hz

electrical connection

Control: removable screw terminals0.5...1.5 mm²/AWG 20...AWG 16
Motor: screw terminal2.5...6 mm²/AWG 14...AWG 10
Line side: screw terminal2.5...6 mm²/AWG 14...AWG 10

connector type

RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
RJ45 (on the remote graphic terminal) for Modbus serial

physical interface

2-wire RS 485 for Modbus serial

transmission frame

RTU for Modbus serial

transmission rate

10/100 Mbit/s for Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial

exchange mode

Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

data format

8 bits, configurable odd, even or no parity for Modbus serial

type of polarization

No impedance for Modbus serial

number of addresses

1…247 for Modbus serial

method of access

Slave Modbus TCP

supply

External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection

local signalling

3 LEDslocal diagnostic:
3 LEDs (dual colour)embedded communication status:
4 LEDs (dual colour)communication module status:
1 LED (red)presence of voltage:

width

144 mm

height

350 mm

depth

203 mm

net weight

4.3 kg

analogue input number

3

analogue input type

AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits

discrete input number

8

discrete input type

DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm

input compatibility

DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2

discrete input logic

Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)

analogue output number

2

analogue output type

Software-configurable voltage AO1, AO2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AO1, AO2: 0...20 mA, resolution 10 bits

sampling duration

2 ms +/- 0.5 ms (DI1...DI4) - discrete input
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output

accuracy

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output

linearity error

AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AO1, AO2: +/- 0.2 % for analog output

relay output number

3

relay output type

Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles

refresh time

Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)

minimum switching current

Relay output R1, R2, R3: 5 mA at 24 V DC

maximum switching current

Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC

isolation

Between power and control terminals

Variable speed drive application selection

Compressor centrifugal Building - HVAC
Other application Food and beverage processing
Fan Mining mineral and metal
Pump Mining mineral and metal
Fan Oil and gas
Other application Water and waste water
Screw compressor Building - HVAC
Pump Food and beverage processing
Fan Food and beverage processing
Atomization Food and beverage processing
Electro submersible pump (ESP) Oil and gas
Water injection pump Oil and gas
Jet fuel pump Oil and gas
Compressor for refinery Oil and gas
Centrifuge pump Water and waste water
Positive displacement pump Water and waste water
Electro submersible pump (ESP) Water and waste water
Screw pump Water and waste water
Lobe compressor Water and waste water
Screw compressor Water and waste water
Compressor centrifugal Water and waste water
Fan Water and waste water
Conveyor Water and waste water
Mixer Water and waste water

Motor power range AC-3

1.1…2 kW at 200…240 V 3 phases

Environment

insulation resistance

> 1 MOhm 500 V DC for 1 minute to earth

noise level

54.5 dB conforming to 86/188/EEC

power dissipation in W

Natural convection: 29 W at 200 V, switching frequency 4 kHz
Forced convection: 53 W at 200 V, switching frequency 4 kHz

volume of cooling air

38 m3/h

operating position

Vertical +/- 10 degree

maximum THDI

<48 % full load conforming to IEC 61000-3-12

electromagnetic compatibility

Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

pollution degree

2 conforming to EN/IEC 61800-5-1

vibration resistance

1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

shock resistance

15 gn for 11 ms conforming to IEC 60068-2-27

relative humidity

5…95 % without condensation conforming to IEC 60068-2-3

ambient air temperature for operation

-15…50 °C (without)
50…60 °C (with derating factor)

ambient air temperature for storage

-40…70 °C

operating altitude

<= 1000 m without
1000...4800 m with current derating 1 % per 100 m

environmental characteristic

Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3

standards

UL 508C
EN/IEC 61800-3
Environment 1 category C2 EN/IEC 61800-3
Environment 2 category C3 EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1

product certifications

ATEX INERIS
CSA
REACH
TÜV
ATEX zone 2/22
DNV-GL
UL

marking

CE

Offer Sustainability

Sustainable offer status

Green Premium product

REACh Regulation

REACh Declaration

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

China RoHS declaration

Environmental Disclosure

Product Environmental Profile

Circularity Profile

End of Life Information

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins